The residential elevator industry is regulated in some states, but not all. Even if a state doesn’t regulate, there are other safety procedures to follow.
Inspect Your Elevator
An important safety procedure for all residential elevators is inspecting them before you ride. In addition to inspecting the elevator itself, check that each elevator car is in good condition and that the doors are working properly.
Make sure that all of the cables are tight and working properly on both cars. Also, make sure that the car doors are working properly and that each door is closed securely.
This is also an excellent time to check all of the safety devices installed on your elevator. These safety devices include:
● Dead Man’s Switch: This is a safety device installed on all elevators to ensure that they won’t move while the elevator is not in use.
● Override Switch: This switch stops the elevator car from moving if the main power fails.
● Brake: A brake is used to lock the car doors open if the power fails. You can activate this brake by pressing a button or pulling a lever.
● Emergency Stop: An emergency stop is installed on all residential elevators to stop the car in case of an emergency such as a power failure.
Check Your Doors
The doors on your residential elevators should be inspected for safety. Make sure that each door is fully closed and securely latched. Also make sure that the doors are in good condition, that they are not bent or broken, and that they are working properly. Also, check that the latches are in good condition and working properly.
Depending on the room in your home that your elevator serves, you may need to install a doorstop. A doorstop is a piece of furniture that rests against the door of an elevator and holds it open during the ascent or descent. This way, multiple people can board the car without the door closing unexpectedly.
Make Sure The Tracks Are Clear
Always check to see if the elevator tracks are clear before entering. If there are people or objects in the way, stop the elevator and move them out of the way. Be sure to use caution when ascending or descending, and always be aware of your surroundings.
Check the Lights In The Elevator
Most residential elevators have a light in the elevator that indicates when it is working. If the light does not work, chances are that there is something wrong with the elevator.
Check to see if there is the power to the light and if it is working properly. If everything looks okay, make sure that the cable is connected properly and tight. Finally, check for any objects or obstructions that may be in the way of the Elevator moving up or down.
Check the Controls
Make sure that the controls are in good condition and working properly. If the elevator is not moving, check to see if the buttons are pushing back and forth. If they are not, then there may be something blocking the way of the button. If all else fails, you may need to call a service technician.
Test the Brakes Immediately After an Emergency Power Loss
You can test your brakes by pressing the emergency stop button on your keypad as you normally would when you return home from work. If the elevator doesn’t stop immediately you can press and hold the emergency stop button for a few moments.
If it still doesn’t stop, press the emergency stop button again to make sure it’s actually working and not just jammed. Also, ensure that the emergency stop button is in good condition and working properly. If it’s not working properly, call for service immediately.
Also, ensure that the emergency stop button is in good condition and working properly. If it’s not working properly, call for service immediately.
Routine Elevator Maintenance
Make sure that your residential elevators are maintained regularly by following the instructions found in your owner’s manual. These instructions include:
● Keeping the equipment clean and free of debris and corrosion.
● Inspecting, cleaning, and lubricating all components at least once per year or as required by your owner’s manual.
● Replacing all worn parts as needed.
Don’t Overload The Elevator Car
When it comes to using residential elevators, it is important to be responsible and not overload the car. This can cause the elevator to malfunction and could even lead to serious injury. Always use the proper weight limit for your elevator and never put anything that is too heavy or large into the car. If you need assistance getting something up or down a staircase, please call a professional.
Elevators are a vital part of our everyday lives, but like any other mechanical device, they can be dangerous if not used properly. By following a few simple safety tips you can reduce your chances of getting injured when using an elevator at home.
Table of Contents
